MVX A/B Scan Thickness Gauge |
The adjustable square wave pulser provides
the flexibility necessary for both high resolution and penetration
requirements.
The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits). The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring thru-paint and coatings in echo-echo mode. The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. Built-in hardware AGC gain control for thrupaint measurements
in multi-mode operation. |
MX
Series |
The
MX-1 a our most basic model. This gauge can be pre-programmed for
a specific material type using a simple PC program. The MX-1 is an
excellent choice for users that measure the same material type all
the time, and do not have the need to re-calibrate to different materials
on the fly. Note: The material velocity must be known prior to programming. |
MINI-Max
BOLTmeter |
The MINI-MAX, Ultrasonic
Bolt Tension Monitor, defines the state of the art in the measurement
of the actual elongation produced by tightening a threaded fastener. The MINI-MAX can measure the
elongation very accurately in fasteners of virtually any material
from 1/2 inch to 4 feet in length. The measurement is achieved
by determining the change in the transit time, of an ultrasonic
shock wave along the length of the fastener as the fastener is tightened
by any method. The on-board microcomputer automatically interprets
this time measurement to display the time(nanoseconds), elongation,
load, stress, or %strain from stretching a fastener. Through
the use of high speed digital signal processing and automated diagnostics,
the MINI-MAX minimizes the requirement for extensive operator training. With
built in data recordation and reporting through an RS232 interface,
the MNI-MAX offers an easy to use and reliable solution to the most
difficult bolting problem. |