Hardness Tester Equotip

1-800-297-3208

Traceability of the Equotip Hardness Value "L"
Periodical cross securing by calibration of Equotip test block on the Standard hardness test machine of MPA Dortmund / Germany
(German Hardness Standard for Vickers hardness acc. to DIN / EN / ISO 6507)
Original
Equotip-Calibration
Standard
Measurement Standard
 
Measuring Standard Procedure according to ASTM Standard A956-96
 
   
   
 
   

Securing the measurement standard, calibration method and control and maintenance of test equipment according to ISO 9001: 1994
 
 
   
Equotip Unit
- Impact Body
- Impact Device
- Indicating Instrument
Manufacture of new instruments
Repairs
Re-calibration
Equotip Test Block
(PROCEQ Calibration)
Sticker with calibration date, personal confirmation by the authorised supervisor that the corresponding specifications have been met or excelled
Individual calibration certificate with:
individual values
mean value
standard deviation(s)
range (R)
Certificate
included in the delivery
Test Block MPA officially calibrated in HV 100 calibrated acc. to DIN / EN / ISO6507
Equotip Unit
- Impact Body
- Impact Device
- Indicating Instrument
Certificate
(on request)
 
Equotip calibration with Equotip Calibration Standard
Individual PROCEQ Test Certificate with measured values and specified test conditions
Official testing of Equotip Units be the Material Testing Laboratory of the University Hannover/Germany *
* the Material Testing Laboratory of the University of Hannover is accredited according to DKD - K - 02801
Equotip Unit
- Impact Body
- Impact Device
- Indicating Instrument
Service Station
(Authorised Representative)
   
Test Block MPA
Equotip Unit
- Impact Body
- Impact Device
- Indicating Instrument
Test Block Equotip
 
User
or
Test block MPA